• Microsoft Au Daemon Download
• Daemon Sync
• Microsoft Au Daemon Mac Delete Windows 10

APPLIES TO: SQL Server (Linux only) Azure SQL Database Azure Synapse Analytics (SQL DW) Parallel Data Warehouse

Remove Office for Mac applications Open Finder Applications. Command +click to select all of the Office for Mac applications. Ctrl+click an application you selected and click Move to Trash. To uninstall Office for Mac 2011 move the applications to the Trash.Once you've removed everything, empty the Trash and restart your Mac to complete the process. Before you remove Office for Mac 2011, quit all Office applications and make sure there's nothing in Trash that you want to keep. Leave Office applications closed while you go through this process.

In this quickstart, you use Docker to pull and run the SQL Server 2017 container image, mssql-server-linux. Then connect with sqlcmd to create your first database and run queries.

Tip

If you want to run SQL Server 2019 containers, see the SQL Server 2019 version of this article.

Note

Starting with SQL Server 2019 CU3, Ubuntu 18.04 is supported.

In this quickstart, you use Docker to pull and run the SQL Server 2019 container image, mssql-server. Then connect with sqlcmd to create your first database and run queries.

Tip

This quickstart creates SQL Server 2019 containers. If you prefer to create SQL Server 2017 containers, see the SQL Server 2017 version of this article.

This image consists of SQL Server running on Linux based on Ubuntu 18.04. It can be used with the Docker Engine 1.8+ on Linux or on Docker for Mac/Windows. This quickstart specifically focuses on using the SQL Server on linux image. The Windows image is not covered, but you can learn more about it on the mssql-server-windows-developer Docker Hub page.

Prerequisites

• Docker Engine 1.8+ on any supported Linux distribution or Docker for Mac/Windows. For more information, see Install Docker.
• Docker overlay2 storage driver. This is the default for most users. If you find that you are not using this storage provider and need to change, please see the instructions and warnings in the docker documentation for configuring overlay2.
• Minimum of 2 GB of disk space.
• Minimum of 2 GB of RAM.
• System requirements for SQL Server on Linux.

Pull and run the container image

Before starting the following steps, make sure that you have selected your preferred shell (bash, PowerShell, or cmd) at the top of this article.

1. Pull the SQL Server 2017 Linux container image from Microsoft Container Registry.

   Tip

   If you want to run SQL Server 2019 containers, see the SQL Server 2019 version of this article.

   The previous command pulls the latest SQL Server 2017 container image. If you want to pull a specific image, you add a colon and the tag name (for example, mcr.microsoft.com/mssql/server:2017-GA-ubuntu). To see all available images, see the mssql-server Docker hub page.

   For the bash commands in this article, sudo is used. On macOS, sudo might not be required. On Linux, if you do not want to use sudo to run Docker, you can configure a docker group and add users to that group. For more information, see Post-installation steps for Linux.

2. To run the container image with Docker, you can use the following command from a bash shell (Linux/macOS) or elevated PowerShell command prompt.

   Note

   The password should follow the SQL Server default password policy, otherwise the container can not setup SQL server and will stop working. By default, the password must be at least 8 characters long and contain characters from three of the following four sets: Uppercase letters, Lowercase letters, Base 10 digits, and Symbols. You can examine the error log by executing the docker logs command.

   Note

   By default, this creates a container with the Developer edition of SQL Server 2017. The process for running production editions in containers is slightly different. For more information, see Run production container images.

   The following table provides a description of the parameters in the previous docker run example:

   Parameter	Description
   -e 'ACCEPT_EULA=Y'	Set the ACCEPT_EULA variable to any value to confirm your acceptance of the End-User Licensing Agreement. Required setting for the SQL Server image.
   -e 'SA_PASSWORD=<YourStrong@Passw0rd>'	Specify your own strong password that is at least 8 characters and meets the SQL Server password requirements. Required setting for the SQL Server image.
   -p 1433:1433	Map a TCP port on the host environment (first value) with a TCP port in the container (second value). In this example, SQL Server is listening on TCP 1433 in the container and this is exposed to the port, 1433, on the host.
   --name sql1	Specify a custom name for the container rather than a randomly generated one. If you run more than one container, you cannot reuse this same name.
   -d mcr.microsoft.com/mssql/server:2017-latest	The SQL Server 2017 Linux container image.

3. Microsoft windows not supported on mac. To view your Docker containers, use the docker ps command.

   You should see output similar to the following screenshot:

4. If the STATUS column shows a status of Up, then SQL Server is running in the container and listening on the port specified in the PORTS column. If the STATUS column for your SQL Server container shows Exited, see the Troubleshooting section of the configuration guide.

The -h (host name) parameter is also useful, but it is not used in this tutorial for simplicity. This changes the internal name of the container to a custom value. This is the name you'll see returned in the following Transact-SQL query:

Setting -h and --name to the same value is a good way to easily identify the target container.

Pull and run the container image

Before starting the following steps, make sure that you have selected your preferred shell (bash, PowerShell, or cmd) at the top of this article.

1. Pull the SQL Server 2019 Linux container image from Docker Hub.

   Tip

   This quickstart uses the SQL Server 2019 Docker image. If you want to run the SQL Server 2017 image, see the SQL Server 2017 version of this article.

   The previous command pulls the SQL Server 2019 container image based on Ubuntu. To instead use container images based on RedHat, see Run RHEL-based container images. To see all available images, see the mssql-server-linux Docker hub page.

   For the bash commands in this article, sudo is used. On macOS, sudo might not be required. On Linux, if you do not want to use sudo to run Docker, you can configure a docker group and add users to that group. For more information, see Post-installation steps for Linux.

2. To run the container image with Docker, you can use the following command from a bash shell (Linux/macOS) or elevated PowerShell command prompt.

   Note

   The password should follow the SQL Server default password policy, otherwise the container can not setup SQL server and will stop working. By default, the password must be at least 8 characters long and contain characters from three of the following four sets: Uppercase letters, Lowercase letters, Base 10 digits, and Symbols. You can examine the error log by executing the docker logs command.

   Note

   By default, this creates a container with the Developer edition of SQL Server 2019.

   The following table provides a description of the parameters in the previous docker run example:

   Parameter	Description
   -e 'ACCEPT_EULA=Y'	Set the ACCEPT_EULA variable to any value to confirm your acceptance of the End-User Licensing Agreement. Required setting for the SQL Server image.
   -e 'SA_PASSWORD=<YourStrong@Passw0rd>'	Specify your own strong password that is at least 8 characters and meets the SQL Server password requirements. Required setting for the SQL Server image.
   -p 1433:1433	Map a TCP port on the host environment (first value) with a TCP port in the container (second value). In this example, SQL Server is listening on TCP 1433 in the container and this is exposed to the port, 1433, on the host.
   --name sql1	Specify a custom name for the container rather than a randomly generated one. If you run more than one container, you cannot reuse this same name.
   mcr.microsoft.com/mssql/server:2019-CU3-ubuntu-18.04	The SQL Server 2019 Ubuntu Linux container image.

3. To view your Docker containers, use the docker ps command.

   You should see output similar to the following screenshot:

4. If the STATUS column shows a status of Up, then SQL Server is running in the container and listening on the port specified in the PORTS column. If the STATUS column for your SQL Server container shows Exited, see the Troubleshooting section of the configuration guide.

The -h (host name) parameter is also useful, but it is not used in this tutorial for simplicity. This changes the internal name of the container to a custom value. This is the name you'll see returned in the following Transact-SQL query:

Setting -h and --name to the same value is a good way to easily identify the target container.

Change the SA password

The SA account is a system administrator on the SQL Server instance that gets created during setup. After creating your SQL Server container, the SA_PASSWORD environment variable you specified is discoverable by running echo $SA_PASSWORD in the container. For security purposes, change your SA password.

1. Choose a strong password to use for the SA user.

2. Use docker exec to run sqlcmd to change the password using Transact-SQL. In the following example, replace the old password, <YourStrong!Passw0rd>, and the new password, <YourNewStrong!Passw0rd>, with your own password values.

Connect to SQL Server

The following steps use the SQL Server command-line tool, sqlcmd, inside the container to connect to SQL Server.

1. Use the docker exec -it command to start an interactive bash shell inside your running container. In the following example sql1 is name specified by the --name parameter when you created the container.

2. Once inside the container, connect locally with sqlcmd. Sqlcmd is not in the path by default, so you have to specify the full path.

   Tip

   You can omit the password on the command-line to be prompted to enter it.

3. If successful, you should get to a sqlcmd command prompt: 1>.

Create and query data

The following sections walk you through using sqlcmd and Transact-SQL to create a new database, add data, and run a simple query.

Create a new database

The following steps create a new database named TestDB.

1. From the sqlcmd command prompt, paste the following Transact-SQL command to create a test database:

2. On the next line, write a query to return the name of all of the databases on your server:

3. The previous two commands were not executed immediately. You must type GO on a new line to execute the previous commands:

Insert data

Next create a new table, Inventory, and insert two new rows.

1. From the sqlcmd command prompt, switch context to the new TestDB database:

2. Create new table named Inventory:

3. Insert data into the new table:

4. Type GO to execute the previous commands:

Select data

Now, run a query to return data from the Inventory table.

1. From the sqlcmd command prompt, enter a query that returns rows from the Inventory table where the quantity is greater than 152:

2. Execute the command:

Exit the sqlcmd command prompt

1. To end your sqlcmd session, type QUIT:

2. To exit the interactive command-prompt in your container, type exit. Your container continues to run after you exit the interactive bash shell.

Connect from outside the container

You can also connect to the SQL Server instance on your Docker machine from any external Linux, Windows, or macOS tool that supports SQL connections.

The following steps use sqlcmd outside of your container to connect to SQL Server running in the container. These steps assume that you already have the SQL Server command-line tools installed outside of your container. The same principles apply when using other tools, but the process of connecting is unique to each tool.

1. Find the IP address for the machine that hosts your container. On Linux, use ifconfig or ip addr. On Windows, use ipconfig.

2. For this example, install the sqlcmd tool on your client machine. For more information, see Install sqlcmd on Windows or Install sqlcmd on Linux.

3. Run sqlcmd specifying the IP address and the port mapped to port 1433 in your container. In this example, that is the same port, 1433, on the host machine. If you specified a different mapped port on the host machine, you would use it here.

4. Run Transact-SQL commands. When finished, type QUIT.

Other common tools to connect to SQL Server include:

Remove your container

If you want to remove the SQL Server container used in this tutorial, run the following commands:

Warning

Stopping and removing a container permanently deletes any SQL Server data in the container. If you need to preserve your data, create and copy a backup file out of the container or use a container data persistence technique.

Nov 18, 2019  Adobe InDesign is our favorite Desktop Publishing software on Mac and our top rated alternative to Microsoft Publisher on Mac. Nowadays, far more professional designers, writers and publishers use InDesign for publishing than its biggest rival QuarkXPress which has become bloated, outdated and expensive. Adobe indesign microsoft publisher mac.

Docker demo

After you have tried using the SQL Server container image for Docker, you might want to know how Docker is used to improve development and testing. The following video shows how Docker can be used in a continuous integration and deployment scenario.

Next steps

For a tutorial on how to restore database backup files into a container, see Restore a SQL Server database in a Linux Docker container. To explore other scenarios, such as running multiple containers, data persistence, and troubleshooting, see Configure SQL Server container images on Docker.

Also, check out the mssql-docker GitHub repository for resources, feedback, and known issues.

Applies to:

Collecting diagnostic information

If you can reproduce a problem, please increase the logging level, run the system for some time, and restore the logging level to the default.

1. Increase logging level:

2. Reproduce the problem

3. Run sudo mdatp --diagnostic --create to backup Microsoft Defender ATP's logs. The files will be stored inside of a .zip archive. This command will also print out the file path to the backup after the operation succeeds.

4. Restore logging level:

Logging installation issues

If an error occurs during installation, the installer will only report a general failure.

The detailed log will be saved to /Library/Logs/Microsoft/mdatp/install.log. If you experience issues during installation, send us this file so we can help diagnose the cause.

Uninstalling

There are several ways to uninstall Microsoft Defender ATP for Mac. Please note that while centrally managed uninstall is available on JAMF, it is not yet available for Microsoft Intune.

Interactive uninstallation

• Open Finder > Applications. Right click on Microsoft Defender ATP > Move to Trash.

From the command line

• sudo rm -rf '/Applications/Microsoft Defender ATP.app'
• sudo rm -rf '/Library/Application Support/Microsoft/Defender/'

Configuring from the command line

Microsoft Au Daemon Download

Important tasks, such as controlling product settings and triggering on-demand scans, can be done from the command line:

Client Microsoft Defender ATP quarantine directory

/Library/Application Support/Microsoft/Defender/quarantine/ contains the files quarantined by mdatp. The files are named after the threat trackingId. The current trackingIds is shown with mdatp --threat --list --pretty.

Daemon Sync

Microsoft Defender ATP portal information

Microsoft Au Daemon Mac Delete Windows 10

This blog provides detailed guidance on what to expect in Microsoft Defender ATP Security Center.